Ecomuls, 50 g
Article number : 2604

B. HENRICHFREISE GMBH & CO. KG - behawe

Shop-Verantwortlicher: Birgit Henrichfreise

Zum Sporkfeld 48
DE - 33397 Rietberg
Telefon: 05244-700950
Telefax: 05244-700955
E-Mail : info@behawe.com

USt-ID-Nummer: DE336475339

Steuernummer FA Rheda-Wiedenbrück:
347 5707 1973

www.behawe.com

PICTURE OF ARTICLE

DESCRIPTION:


An all-rounder - broad spectrum emulsifier - NaTrue and EcoCert certification - and gmo-free!

Ecomuls is a plant-based, non-ionic oil-in-water emulsifier. Its innovative combination of components result in an emulsifying system with excellent properties.

Ecomuls is easy to use; its versatility makes it unique. Ecomuls will succeed in making creams with high or low viscosity, viscous or thin lotions, even spray emulsions.

Products with Ecomuls are suited for all skin types, especially for dry skin lacking oil and moisture. It will also give wonderful results when added to deodorants: spray, roll-on, or cream. It is also suited for hair care products like rinses, hair creams and packs.

Ecomuls will produce very glossy emulsions with excellent sensory properties. They can be applied without whitening effect, spread easily and are absorbed well even if they contain a high amount of fat/oil. Even then, they will leave no oily shine, just a velvety feeling.

Ecomuls is stable in a wide range of formulas: oily phases from 20 to 40%. Salts and electrolytes and small amounts of acid are tolerated well. In products with a urea content of over 10 %, it works better than any other emulsifier.
The pH value should be between 6 and 7. If a lower pH is desired, lactic acid can be added. You have to use a mini pipette, though - if the pH sinks below 5, the emulsion will break .
Ecomuls can be melted in the heated oily or aqueous phase. If you want a spray product, you should melt it in the aqueous phase. It you melt it in the oily phase, the end product will turn out more viscous.
Always pay attention to the temperature when using Ecomuls - it is very important to work at 70 to 80°C. The emulsion will be soft at first, but a few hours after making it will reach its final consistency.
In formulas with an oily phase of appr. 20 %, it is recommended to add consistency enhancers or gel forming agents. Usually, 1 to 2 % fatty alcohols and 0,1 to 0,2 gelling agents are enough to stabilize the emulsion. This will improve the emulsion considerably.
(Source: Brigitte Bräutigam)
Concentration:
Cream: 5 to 8 % of the total quantity, or 20% of the oily phase
Spray and Lotion: 3 to 4 % of the total quantity, or 12 to 15 % of the oily phase
INCI: Glycerinstearat, Polyglyceryl-6, Cetearylalkohol, Palmitat/Succinat


PRICE:
3,70€ VAT incl.
Price per kilogram: 74,00 Euro

PRODUCT-LINK: https://www.behawe.com/index.php?product=2604&lang=2



> BUY

RETURN TO PRODUCT CATALOGUE ::: DOWNLOAD CATALOGUE (PDF)
Update: 2021-09-28 14:56:24